Shopping Categories:
Company Info:
|
|
|  |
MMA7660 3 Axis Accelerometer Breakout AssemblyAssembled and tested in the USA. Fully assembled and tested. This is a breakout board developed for the Freescale MMA7660FC 3-axis G sensor ( accelerometer ) This board is setup to be used in a standard 0.1" breadboard or proto-board.
Breakout Board Features:
* 0.1" spaced pins in a 2 row by 4 pin configuration , rows are spaced 0.6"
* Independent power for DVDD and AVDD with 0.1uF bypass capacitors mounted directly below the IC.
* Low Voltage Operation: 2.4 V – 3.6 V
* 0805 resistor pads for SDA and SCL pull-up to DVDD, allows flexibility for I2C bus pull-up location. You can use internal pull-ups from your micro-controller, or pull-ups from another location on the I2C bus, or populate the breakout board resistors (two 4.7k Ohm 0805 resistor included with each board)
For detailed product information and code example downloads please consult the product forums section of this website. http://www.madscientisthut.com/forum_php/viewtopic.php?f=13&t=5
|
|
|
|
|
|  |
10 Bit Magnetic Rotation EncoderAssembled and tested in the USA. Assembled and fully tested 10 Bit rotary encoder based on the AS5040 magnetic sensor. 10-bit resolution providing 1024 absolute positions per 360° (step size ~ 0.35°). This board will provide the micro-controller developer with a PCB to interface to the AS5040 rotary encoder. The assembly includes 2 LEDs for diagnostic purposes (magnet alignment). The PCB can be used with the top or bottom of the board facing the magnet. For detailed product information please consult the product forums section of this website. http://www.madscientisthut.com/forum_php
In addition you now get one Neodymium Diametric Disc N35H 6x2.5mm magnet free with each board ordered (a $1.50 value).
Back of board:
|
|
|
|
|
| |
12 Bit Magnetic Rotation EncoderAssembled and tested in the USA. Fully assembled and tested 12 Bit rotary encoder based on the AS5045 magnetic sensor. 12-bit resolution providing 4096 absolute positions per 360° (step size ~ 0.088°). This board will provide the micro-controller developer with a PCB to interface to the AS5045 rotary encoder. The assembly includes 2 LEDs for diagnostic purposes (magnet alignment). The PCB can be used with the top or bottom of the board facing the magnet. For detailed product information please consult the product forums section of this website.. http://www.madscientisthut.com/forum_php
In addition you now get one Neodymium Diametric Disc N35H 6x2.5mm magnet free with each board ordered (a $1.50 value).
Back of board:
|
|
|
|
|
|  |
Neodymium Diametric Disc N35H 6x2.5mm 120CON SALE NOW, was 1.50
* Dimensions: 6mm dia. x 2.5mm thick
* Tolerances: ±0.127mm
* Material: NdFeB, Grade N35H
* Rated for maximum 120C (248F) operating temperature
* Plating/Coating: Ni-Cu-Ni (Nickel)
* Magnetization Direction: Diametrical
* Weight: 0.0012lbs.
* Brmax: 11800 to 12200 Gauss
* BHmax: 33 to 36 MGOe
These small diametrically magnetized cylinders are intended for use with the 10 Bit and 12 Bit magnetic rotary encoders. These are the exact AS5000-M1 , AS5000-MD6H-1 magnets called out in the AS5035, AS5040, AS5043 and AS5045 datasheet. The price is for 1 (ONE) magnet.
|
|
|
|
|
Neodymium Diametric Disc N35EH 6x2.5mm 200CON SALE NOW was 1.75
* Dimensions: 6mm dia. x 2.5mm thick
* Tolerances: ±0.127mm
* Material: NdFeB, Grade N35EH
* Rated for maximum 200C (392F) operating temperature
* Plating/Coating: Ni-Cu-Ni (Nickel)
* Magnetization Direction: Diametrical
* Weight: 0.0012lbs.
* Brmax: 11800 to 12200 Gauss
* BHmax: 33 to 36 MGOe
These small diametrically magnetized cylinders are intended for use with the 10 Bit and 12 Bit magnetic rotary encoders. These are the exact AS5000-M1 , AS5000-MD6H-1 magnets called out in the AS5035, AS5040, AS5043 and AS5045 datasheet. The price is for 1 (ONE) magnet.
|
|
|
|
|
|
|
|
Copyright ©
www.MadScientistHut.com
|
